High quality Professional stone hammer crusher

1.High prcocessing capacity 2.High crushing rate 3.Simple structure and easy maintenance

Introduction of Professional stone hammer crusher

The series of hammer crushers breaks the materials by the collision the high-speed rotating hammer block and the colliding surface of the materials.

It is a kind of crusher which can break the materials with max particle size of 600-18000mm into the materials with 25mm or below 25mm.

Application of Professional stone hammer crusher

Hammer crusher is mainly applied to low abrasion materials with medium hardness and compression strength not exceed 100Mpa. Such as coal, salt, chalk, gypsum, bricks, tiles, limestone, glass, etc. It is also used to crush wood chips with strong fiber structure and tenacity, and the waste from asbestos cement to recycle asbestos fiber, etc. In addition, hammer crusher can be not only applied in crushing line and sand production line, but also applied instead of cone crusher.

Features of Professional stone hammer crusher

Hammer crusher has the advantages of high product capacity, high crushing ratio, low power consumption, uniform products partial size, simple structure, compact and light, low investment cost, easy to management, etc. The defects are: when crushing very hard materials, it will cause greater wear of hammer and grate and consume more metal; it needs more maintenance time and uniform feeding of materials; when crushing soft-moist materials, the capacity will become significantly lower and even stop because of material jam. In order to avoid jam, the moisture content of materials should be less than 10%-15%.

Technical parameters of Professional stone hammer crusher

Type	Model	Feed size(mm)	Discharge Size(mm)	Capacity(m3/h)	Motor		Weight(t)	Overall Size( L*W×*H )(mm)
					Number of Poles	Power(kw)
Hammer Crusher	PCΦ400×300	≤200	≤25	5-10	4	11	0.8	900×670×860
	PCΦ600×400	≤250	≤30	10-22	4	22	1.5	1200×1050×1200
	PCΦ800×600	≤250	≤25	18-40	4	55	3.8	1310×1180×1310
	PCΦ1000×800	≤350	≤35	25-50	4	75	4.9	1600×1390×1575
	PCΦ1000×1000	≤300	≤35	30-55	6	132	8	1800×1590×1775
	PCΦ1250×1250	≤350	≤35	35-65	6	180	14	2060×1600×1890
	PCΦ1400×1400	≤350	≤35	50-100	6	280	32	2365×1870×2220
	PCΦ1600×1600	≤350	≤35	100-150	8	480	37.5	3050×2850×2800

The following is the stone production line

High quality Professional stone hammer crusher